Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 1/2"
(697 reviews)
Price: $8.59
In Stock
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 1/2"
Item # CE10700A
Retail:$13.55
Our Price: $8.59
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (697)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Boat Trailer Parts - CE10700A
- Rollers
- Roller Shafts
- 1/2 Inch Diameter
- 5-1/4 Inch Long
- Zinc-Plated Steel
- CE Smith
5-1/4" Long x 1/2" diameter steel shaft for 4" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.
Features:
- Roller shaft accommodates a roller on your boat trailer
- Constructed of sturdy, zinc-plated steel
- Attaches with 2 end cap nuts (included)
- Made in the USA
Specs:
- Application: 4" rollers
- Quantity: 1 shaft and 2 pal nuts
- Shaft length: 5-1/4"
- Diameter: 1/2"
10700A Zinc-Plated Steel Replacement Roller Shaft with End Cap Nuts by CE Smith - 5-1/4" Long x 1/2" Diameter
Video of Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 1/2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for CE Smith Boat Trailer Roller Shaft with Pal Nuts Review
Hi there boat trailer owners. Today, we're going to be taking a look at CE Smith's replacement keel roller rods. And this is what our replacement roller rod's going to look like. These are available in either two different diameters, whether it be five eighths, like we have here or half inch, you just want to match it up to your old one. And they're also available in varying lengths. So that way you can get the proper span for your particular trailer.
And all of them are zinc coated to protect them from rusting corrosion, which is very common on your boat trailers since you're pulling it in and out of the boat dock all the time, you're next to the Lake. They often get wet. So this way we can ensure that we're going to have long lasting operation of this rod, and it's not going to seize up inside of here due to rust and corrosion.Also included with it you'll receive cap nuts for each side of your rod. And these are nice because once you press them on there, they're pretty much a permanent fit, you have to really try to get them off of there. And since this is a roller, it doesn't ever really get forces side to side, but we don't want to use regular thread on nuts on something like this since it does roll.
That could potentially cause the nuts to back off. So this is an ideal solution. If your old keel roller or keel roller rod are worn out and need replacement, the replacement shaft here is going to be a great option for you because it's kind of a one use thing, unless you can get yourself some new cap nuts. And even if you do get new cabinets, if it's heavily corroded and worn down, those cap nuts may not fit as tight and as properly as they used to.So when replacing your keel roller, when it's wore out, I highly recommend also replacing the keel roller rod. The rod is going to be made of solid steel with a zinc coating.
So it's going to be extremely durable holding up the weight that is pressed down from the boat sitting on it there. And the zinc coat is going to protect it against rust and corrosion. If your keel roller is worn out. And that's why you're looking at getting replacements. We also carry the keel rollers here at etrailer.com.
So you can get a set up just like this. You can see how nice and smooth it is, and we've got a nice surface for our boat to rest on.Today we're going to be replacing the keel roller's shaft because our key roller's all damaged up and in order to get the roller off, we have to take the shaft out and the nuts typically get damaged and are not reusable. So we're just going to be replacing it all as an assembly. Start by removing our roller's nuts. We're just going to get behind it with a pair of pliers. We're just going to pop that cap off of there. inaudible 00:02:18. Our shaft will then slide out. We can remove our roller and then install our new components. We've got our shaft here and I find it easier to get one cap nut on first. So we're just going to set that on top and we're just going to hammer it into place. I'm going to use a rubber mallet just to help minimize how much dings I make on the little cap. And it's really that simple. And you can see here, there's no way I'm going to push this off. If I wanted to get this off of here, I would almost have to take another hammer and smash it off of there because you're just not going to be able to pull it off. Now we can just take our roller. We're going to set it into place. Slide our rod all the way through the roller, until it comes out on the other side. We'll then take our cap, we're going to set it into place. Now that we got it just barely started. We're going to finish tapping it on. I'm going to use a hammer on the other side, because it might hurt your hip or something else if you're holding it. And we can see our shaft spins, our roller spins and it's nice and solid, it's not going anywhere. Thought you need a hatchet. And that completes our look at CE Smith's replacement keel roller rods.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 5-1/4" x 1/2" - CE10700A
Average Customer Rating: 4.8 out of 5 stars (697 Customer Reviews)
5-1/4" Long x 1/2" diameter steel shaft for 4" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.by: Brad08/30/2023
Service was outstanding. I ordered the wrong size roller shaft and they helped me get the correct size ordered and delivered very timely.
by: John09/13/2019
Spool rollers fit perfectly with shafts and end caps. I sanded and painted the mounting hardware for re-use. etrailer had what I needed, fair price and quick to ship.
by: Louise P.07/25/2017
as you can see, I still have some parts to replace. But I ordered these parts at the beginning of this week. Used free shipping. Delivered Saturday, done Saturday afternoon. So easy. Looking forward to finishing this trailer. Will use etrailer again
by: Stephen C05/27/2014
I didn't rate you as overall as excellecnt because the questions I had should have had the answeres there already. When buying parts, all details should be present, such as dimentions on all aspects. This includes measurments and details of mounting holes and other related part mating details. Many people are trying to rehab their trailers and boats, and do not completely know the engineering. Sorry, that's life. I have been very happy with the parts I have purchased, and was extreamly happly with the responsises to my questions. I just think that the details I needed should have already been there. Taking time to send questions is lost productivity, we are not pro-shops, and the delays can cost us much.
V/R
Stephen
(overall, I am very happy with your site.
by: John M.01/03/2014
This product fits well with the Roller Bracket and the 4" Bow Roller. Very Happy with order turnaround and ease of ordering. I'm fixing up my trailer and will be back here for more.
by: Adam W04/21/2015
The product is as described. What is more important here is ETrailers willingness to step up on an issue. I paid for overnight shipping but it wasnt delivered. I contacted etrailers and they responded back right away. They gave me a partial refund on shipping though it was not their fault. That is customer service!! I will highly recommend.
by: Eric08/25/2019
Great website for trailer parts! Everything was easy to find and correctly described. Shipping was quick and reasonable. All parts were made well and fit properly.
by: Foster04/02/2020
The products arrived on time. The service provided by Amy E was excellent. One of the rollers had to be replace and Amy E took care of it and refunded me back half the shipping from the first order. The service was again excellent and the product met my expectations. I would buy again from etrailer.com
by: Michael 10/01/2022
Clean replacement unit
by: Bill 09/16/2015
I have an older Spartan trailer. Parts can be hard to find.
Found what I needed at a fair price.
Paid extra for quicker delivery.
Received what I ordered by the promised delivery date...
what more could you ask for...
Would definitely order from etrailer again and would recommend them to others.
by: Michael06/22/2021
Would have been five stars but package broke and lost a part. Customer support was excellent and they shipped the missing part right away. Could use better packaging but overall they met my needs and I’d have zero issues ordering parts from etrailer.
by: John06/25/2019
The trailer rollers were well made and just as ordered. The followup on a second shipment was excellent. I would definitely buy again from etrailer.
by: Tom I.02/19/2016
Whenever I work on my boat or utility trailer, etrailer is the first place I look for parts.
by: Don Magnuson10/08/2021
Was very happy with all my dealings with etrailer. I received all parts in a timely manner. Great people to deal with.
Nice to have a good midwest dealer.
by: Don 11/05/2021
Works great used with 4" roller. Fast d elivery.
by: E09/20/2021
Work great not hard to attach to roller bunk
by: Floyd09/14/2016
Just what I needed to repair my boat trailer. Thanks.
by: Michael07/18/2019
Ordered parts for my boat trailer. The performed very well and fit perfectly.
Fast ship out. Great source for anything trailer related.
by: Barry Z04/24/2014
I can't say enough good about etrailer. Their products are top notch and their delivery times are incredible.
by: Ed Redman09/15/2020
Very good service
Roller look fine, now if I can get them to install them....,,
by: Doug J06/12/2015
Excellent roll pin with cap nuts. Very well made!
by: Isaac S06/30/2014
Great service directing me to the right solution
by: Mark 11/20/2022
Fast shipping
by: Bill O.05/20/2013
Make sure everything is set before you hammer on the caps - they don't come off without a lot of effort (I used a torch to heat them enough to knock them off). The fact that they don't come off easily is great unless you have to replace one of the other pieces of the assembly.
by: SCOTT L.08/01/2016
All the products I ordered was spotted on and how fast I received my order was awesome.
25
672
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Adding a Winch Stand and Bow Stop to a Calkins Boat TrailerOne of the keys for a winch mount is the width trailer tongue they fit. Mount # CE31013G fits on 2 inch wide trailer tongues so if that is what you have then this is a great option for the trailer and winch.
view full answer... - Replacement Keel Roller Brackets for a Tee Nee Boat Trailer with 3 Inch RollersThe 3 inch rubber bow roller, # YR3143-4, that you referenced is typically used at the front of the boat near the winch. The rollers that are usually used in the middle and rear are keel rollers. Often times, the v shape of the 3 inch bow roller is too deep for the middle or rear end of a boat hull. I did some research on your Tee Nee trailer and it looks like there are a few different styles that will affect the type of brackets that you will use. If you have frame rails that run perpendicular...
view full answer... - Dimensions of Bolt Holes on CE Smith Bow Roller Bracket for Winch Stands # CE31005PGThe diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, # CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part # CE10700A. The bolt through hole size for the winch shaft bolt is .75 inch diameter. I have included a diagram that shows the dimensions of the bolt holes for the bracket.
view full answer...
- Replacement Parts for Dutton Lainson Roller Bunk DL21740For the Dutton Lainson Roller Bunk # DL21740 we have replacement roller # DL203228 which will fit roller shaft # CE10700A that includes the two cap nuts. The shaft is 5-1/4-inches long.
view full answer... - Bow Stop Setup Availability for a Boat TrailerI believe you are talking about a bow roller like the part # CE31005PG. I recommend bow stop # YR7Y44-4 used with bracket # CE31005PG and shaft # CE10700A for your bow stop set up.
view full answer... - Can the 4" Roller on the CE Smith Keel Roller Assembly Be Replaced and Secured Using a Nut and BoltYes, you can replace the roller on the CE Smith Keel Roller Assembly # CE32005G by popping off the cap nuts and removing the roller shaft. However, I would not recommend using a long bolt and nut. You will want to use the Roller Shaft with Pal Nuts for Boat Trailer Rollers # CE10700A to ensure that everything rolls smoothly. The Boat Trailer 4" Long Spool Roller # DL21566 will provide a 4" roller replacement.
view full answer... - Bracket and Shaft Recommendation for Use with the Yates Flat Bow Stop # YRJONBLOCK The Yates Flat Bow Stop, # YRJONBLOCK , requires a 1/2 inch diameter shaft like # CE10700A . The bracket you mentioned, # CE32004G , takes a 5/8 inch diameter shaft so a 1/2 inch diameter will fit but it will be loose. Out of the parts that we carry this would be the best combination for your application.
view full answer... - Bow Stop, Bracket, and Shaft Recommendations for a Boat TrailerYou will need a bracket that has a 3/8 inch diameter shaft. At this time we do not offer a 3/8 inch diameter shaft. I recommend bow stop # YR7Y44-4 used with bracket # CE31005PG and shaft # CE10700A for your bow stop set up.
view full answer... - Replacement Bow Roller Bracket, Shaft and RollerWe don't have any bow rollers that will fit a roller larger than 1/2 inch in diameter so the best recommendation I could make would be to replace your current setup with something like the part # CE31005PG for a bracket, part # CE10700A for a new roller shaft, and then part # YR300Y for a roller.
view full answer... - Replacement Bow Roller Brackets for Boat TrailerWhile we don't have any specific replacements for your boat trailer we do have bow roller brackets that you may be able to use. For example, the CE Smith Bow Roller Bracket # CE31005PG with the Yates Bow Roller for Boat Trailers - Heavy-Duty Rubber # YR4174-4 and Roller Shaft with Pal Nuts for Boat Trailer Rollers # CE10700A. I have added links to video reviews of these parts as well as links to our entire selection of brackets for you to look through.
view full answer...
- Shaft Recommendation for a 3 Inch Bow Roller for Boat Trailers # YR3143-4The 3 inch bow roller # YR3143-4 takes a 1/2 inch diameter shaft such as # CE10700A. The Pal nuts are included. The length of this shaft is 5-1/4 inches long so you may need to trim it down a little. The cut will need to be straight and smooth so the Pal nuts will still fit on the ends. If a bracket is needed as well we have numerous options. I have included a link to them for you.
view full answer... - Diameter of Hole for Mounting Shaft of # CE31005PGThe diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, # CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part # CE10700A.
view full answer...
- What is Diameter is the Center Hole for Yates Boat Trailer Roller # YR4163-4PYes the Yates roller, # YR4163-4P, does indeed have an approximate 1/2 inch diameter center hole for use with a 1/2 inch shaft. You mentioned that you have a shaft already but if you determine you need a new one use # CE10700A which also comes with new pal nuts. If you determine you also need mounting brackets you can use # CE10211G or # CE10300G.
view full answer... - 1983 Tee Nee Trailer for a Flying Scot Sailboat Keel Roller OptionFrom past customers we have found that the TeeNee trailers use a three inch keel roller like the part # YR300Y. That being said I would need to see a picture of your setup to give you the best options we have. I did some research on your Tee Nee trailer and it looks like there are a few different styles that will affect the type of brackets that you will use. If you have frame rails that run perpendicular to the boat, then I recommend using a set of angle mounting brackets like part...
view full answer... - Replacement 4-1/2 Inch Long Spool Rollers for a Boat TrailerIn order to find the correct replacement spool roller for your boat trailer, you would need to measure from the inside of each mounting bracket. The 4-1/2" long measurement that you provided is not common and we would not have anything that matches this dimension exactly. With that being said, I recommend using a 4" long roller and adding a couple washers on each side. You could also tighten the brackets more to pull them in further. The bells that you mentioned would be too thick to...
view full answer... - Can Yates Flat Bow Stop # YRJONBLOCK Mount to a Boat Trailer Tongue with Bracket # CE32004GThe Yates Flat Bow Stop, # YRJONBLOCK, requires a 1/2 inch diameter shaft like # CE10700A. The bracket you mentioned, # CE32004G, takes a 5/8 inch diameter shaft so a 1/2 inch diameter will fit but it will be loose. Out of the parts that we carry this would be the best combination for your application.
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
David L
Video by:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Isaac S.
6/30/2015
A year with all new parts for the winch and stand. Im very happy